as a tool for repairing pipes, straub pipe repair clamps have installation methods and steps, but in many cases, in order to repair faster, it is easy to omit some steps, resulting in bad conditions. what should i do when bad conditions occur? what to do? let's find out together!

1. identify the outer diameter of the pipe and select the appropriate type of fitting. don't choose the wrong one.
2. eliminate burrs, sharp corners and debris at the end of the pipe, the manufacturer of straub pipe repair clamps tells you that the purpose is to check that there is no foreign matter under the sealing rubber ring and on the steel pipe.
3. mark the ends of both pipes so that the pipe connector is in the center. straub pipe repair clamps manufacturers tell you to align the ends of both pipes after piercing the product into one end of the pipe, then move the connector to the center of both pipes.
4. adjust the pipe connector, then use the hexagonal wrench to evenly tighten the bolts of dn150 and above. after tightening the bolts, tap the insides of both sides of the pipe connector with a mallet to even out the gap with the pipe, then tighten the bolts for a seal.
the above is the handling method of straub pipe repair clamps in bad condition. when bad condition occurs, the pipeline and straub pipe repair clamps should be checked, and then repaired and maintained according to the steps. if you need straub pipe repair clamps, welcome to inquire!